特黄特色三级在线观看免费,看黄色片子免费,色综合久,欧美在线视频看看,高潮胡言乱语对白刺激国产,伊人网成人,中文字幕亚洲一碰就硬老熟妇

學習啦>學習電腦>操作系統>Linux教程>

虛擬機Linux上部署DB2pureScale過程

時間: 春健736 分享

  在Linux操作系統中,可在虛擬機上搭建DB2 pureScale,那么搭建的步驟是怎么樣的呢?DB2 pureScale又有什么用呢?下面隨學習啦小編一起來了解下Linux系統如何在虛擬機上部署DB2 pureScale。

  在虛擬機Linux上部署DB2pureScale實踐過程

  1、環境準備

  硬件環境:3 臺 x86-64虛擬機,內存要求 1.5G 或以上(主要針對虛擬機,內存過低會造成數據庫實例啟動失敗)

  操作系統:Suse Linux Enterprise Server 11.3

  DB2 版本:DB2 v10.5

  機器名:node01 node02 node03

  IP:192.168.18.201 192.168.18.202 192.168.18.203

  網關:192.168.18.2

  利用iscsi服務來做共享存儲功能,其中node01 作為 iscsi 的 Server,node01、node02和 node03 作為 iscsi Client,這樣三臺虛擬機上都能看到相同的磁盤了(按照developer workers上的文章:非 InfiniBand 環境下搭建 DB2 pureScale,我用DB2 v10.5時啟動實例失敗,可能10.5做了限制,CF與member在同一臺機器啟動失敗,幫多了一臺虛擬機)。

  2、操作系統安裝:

  Node01預留出一塊分區,不進行格式化(文件類型為0x83 Linux)做為 pureScale 集群的 Sharing Disk 使用,Node02與Node03跟node01其它相同就可,

  安裝必要的包:

  libstdc++(32 位和 64 位庫)

  glibc(32 位和 64 位庫)

  cpp

  gcc

  gcc-c++

  kernel-source

  binutils

  ksh-93u-0.8.1

  openssh

  ntp

  完成SUSE 11 SP3的安裝。

  驗證:檢查/lib/modules/3.0.76-0.11-default/build/include/linux有無autoconf.h,如果沒有autoconf.h,安裝DB2時會報Compiling GPL :.......Failure錯誤。

  解決方法:cp –v /usr/src/linux-3.0.76-0.11-obj/x86_64/default/include/generated /lib/modules/3.0.76-0.11-default/build/include/linux

  3、添加用戶和用戶組

  三臺機器全部執行如下命令(如果不做特殊說明,以#表示root身份登錄,以$表示db2inst1身份,以下相同)。

  #groupadd -g 1001 db2fadm1

  #groupadd -g 1002 db2iadm1

  #useradd -g db2fadm1 -u 1001 -m -d /home/db2fenc1 -p db2fenc1 db2fenc1

  #useradd -g db2iadm1 -u 1002 -m -d /home/db2inst1 -p db2inst1 db2inst1

  #mkdir /root/.ssh

  # su - db2inst1 -c "mkdir -p /home/db2inst1/.ssh"

  4、配置ssh 信任連接

  ssh信任通俗的說就是直接ssh不用輸入密碼

  在/etc/hosts添加另外兩臺機器的IP地址及機器名(確保3臺機器名與ip地址全部出現在hosts文件中)

  例如我的機器hosts如下:

  127.0.0.1 localhost

  192.168.18.201 node01.site node01

  192.168.18.202 node02.site node02

  192.168.18.203 node03.site node03

  node01執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id01

  #scp /root/.ssh/id01 node02:/root/.ssh

  #scp /root/.ssh/id01 node03:/root/.ssh

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id01

  $scp /home/db2inst1/.ssh/id01 node02:/home/db2inst1/.ssh

  $scp /home/db2inst1/.ssh/id01 node03:/home/db2inst1/.ssh

  node02執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id02

  #scp /root/.ssh/id02 node01:/root/.ssh/

  #scp /root/.ssh/id02 node03:/root/.ssh/

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id02

  $scp /home/db2inst1/.ssh/id02 node01:/home/db2inst1/.ssh/

  $scp /home/db2inst1/.ssh/id02 node03:/home/db2inst1/.ssh/

  node03執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id03

  #scp /root/.ssh/id03 node01:/root/.ssh

  #scp /root/.ssh/id03 node02:/root/.ssh

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id03

  $scp /home/db2inst1/.ssh/id03 node01:/home/db2inst1/.ssh/

  $scp /home/db2inst1/.ssh/id03 node02:/home/db2inst1/.ssh/

  分別在node01、node02、node03執行如下命令

  #cd /root/.ssh

  #cat id01 id02 id03 > authorized_keys

  #chmod 600 authorized_keys

  #su - db2inst1

  $cd /home/db2inst1/.ssh

  $ cat id01 id02 id03 > authorized_keys

  測試是否配置成功

  3臺機器分別以root與db2inst1執行:

  #ssh node01 ls

  #ssh node02 ls

  #ssh node03 ls

  #su - db2inst1

  $ssh node01 ls

  $ssh node02 ls

  $ssh node03 ls

  確保不用輸入密碼,則配置成功。

  5、ISCSI 共享存儲配置

  Iscsi server端配置(node01上執行):

  修改/etc/ietd.conf,添加如下內容:

  Target iqn.2014-03.node01.site:scsidisk01

  Lun 0 Path=/dev/sda4,Type=fileio

  注意:我的未分區硬盤為/dev/sda4,你的可能不一樣的@_@~~~~

  添加自啟動

  #chkconfig -a iscsitarget

  檢查是否成功

  #chkconfig -l iscsitarget

  結果:iscsitarget 0:off 1:off 2:off 3:on 4:off 5:on 6:off

  重啟iscsitarget服務

  # /etc/init.d/iscsitarget restart

  iscsi client端配置(node01、node02、node03執行,):

  iscsitarget文件內容如下:

  #! /bin/sh

  ### BEGIN INIT INFO

  # Provides: iscsiclsetup

  #node02與node03上如果未裝iscsitarget需將下下行的$iscsitarget

  # Required-Start: $network $syslog $iscsitarget $remote_fs smartd

  # Required-Stop:

  # Default-Start: 3 5

  # Default-Stop: 0 1 2 6

  # Description: ISCSI client setup

  ### END INIT INFO

  case " class="main">

虛擬機Linux上部署DB2pureScale過程

時間: 春健736 分享

  iscsiadm --mode discoverydb --type sendtargets --portal 192.168.18.201 --discover

  iscsiadm --m node --targetname iqn.2014-03.node01.site:scsidisk01 --portal 192.168.18.201:3260 --login

  ;;

  stop)

  iscsiadm -m node -T iqn.2014-03.node01.site:scsidisk01 -p 192.168.18.201 --logout

  ;;

  restart) ## Stop the service and regardless of whether it was ## running or not, start it again.

  

虛擬機Linux上部署DB2pureScale過程

時間: 春健736 分享

  在Linux操作系統中,可在虛擬機上搭建DB2 pureScale,那么搭建的步驟是怎么樣的呢?DB2 pureScale又有什么用呢?下面隨學習啦小編一起來了解下Linux系統如何在虛擬機上部署DB2 pureScale。

  在虛擬機Linux上部署DB2pureScale實踐過程

  1、環境準備

  硬件環境:3 臺 x86-64虛擬機,內存要求 1.5G 或以上(主要針對虛擬機,內存過低會造成數據庫實例啟動失敗)

  操作系統:Suse Linux Enterprise Server 11.3

  DB2 版本:DB2 v10.5

  機器名:node01 node02 node03

  IP:192.168.18.201 192.168.18.202 192.168.18.203

  網關:192.168.18.2

  利用iscsi服務來做共享存儲功能,其中node01 作為 iscsi 的 Server,node01、node02和 node03 作為 iscsi Client,這樣三臺虛擬機上都能看到相同的磁盤了(按照developer workers上的文章:非 InfiniBand 環境下搭建 DB2 pureScale,我用DB2 v10.5時啟動實例失敗,可能10.5做了限制,CF與member在同一臺機器啟動失敗,幫多了一臺虛擬機)。

  2、操作系統安裝:

  Node01預留出一塊分區,不進行格式化(文件類型為0x83 Linux)做為 pureScale 集群的 Sharing Disk 使用,Node02與Node03跟node01其它相同就可,

  安裝必要的包:

  libstdc++(32 位和 64 位庫)

  glibc(32 位和 64 位庫)

  cpp

  gcc

  gcc-c++

  kernel-source

  binutils

  ksh-93u-0.8.1

  openssh

  ntp

  完成SUSE 11 SP3的安裝。

  驗證:檢查/lib/modules/3.0.76-0.11-default/build/include/linux有無autoconf.h,如果沒有autoconf.h,安裝DB2時會報Compiling GPL :.......Failure錯誤。

  解決方法:cp –v /usr/src/linux-3.0.76-0.11-obj/x86_64/default/include/generated /lib/modules/3.0.76-0.11-default/build/include/linux

  3、添加用戶和用戶組

  三臺機器全部執行如下命令(如果不做特殊說明,以#表示root身份登錄,以$表示db2inst1身份,以下相同)。

  #groupadd -g 1001 db2fadm1

  #groupadd -g 1002 db2iadm1

  #useradd -g db2fadm1 -u 1001 -m -d /home/db2fenc1 -p db2fenc1 db2fenc1

  #useradd -g db2iadm1 -u 1002 -m -d /home/db2inst1 -p db2inst1 db2inst1

  #mkdir /root/.ssh

  # su - db2inst1 -c "mkdir -p /home/db2inst1/.ssh"

  4、配置ssh 信任連接

  ssh信任通俗的說就是直接ssh不用輸入密碼

  在/etc/hosts添加另外兩臺機器的IP地址及機器名(確保3臺機器名與ip地址全部出現在hosts文件中)

  例如我的機器hosts如下:

  127.0.0.1 localhost

  192.168.18.201 node01.site node01

  192.168.18.202 node02.site node02

  192.168.18.203 node03.site node03

  node01執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id01

  #scp /root/.ssh/id01 node02:/root/.ssh

  #scp /root/.ssh/id01 node03:/root/.ssh

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id01

  $scp /home/db2inst1/.ssh/id01 node02:/home/db2inst1/.ssh

  $scp /home/db2inst1/.ssh/id01 node03:/home/db2inst1/.ssh

  node02執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id02

  #scp /root/.ssh/id02 node01:/root/.ssh/

  #scp /root/.ssh/id02 node03:/root/.ssh/

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id02

  $scp /home/db2inst1/.ssh/id02 node01:/home/db2inst1/.ssh/

  $scp /home/db2inst1/.ssh/id02 node03:/home/db2inst1/.ssh/

  node03執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id03

  #scp /root/.ssh/id03 node01:/root/.ssh

  #scp /root/.ssh/id03 node02:/root/.ssh

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id03

  $scp /home/db2inst1/.ssh/id03 node01:/home/db2inst1/.ssh/

  $scp /home/db2inst1/.ssh/id03 node02:/home/db2inst1/.ssh/

  分別在node01、node02、node03執行如下命令

  #cd /root/.ssh

  #cat id01 id02 id03 > authorized_keys

  #chmod 600 authorized_keys

  #su - db2inst1

  $cd /home/db2inst1/.ssh

  $ cat id01 id02 id03 > authorized_keys

  測試是否配置成功

  3臺機器分別以root與db2inst1執行:

  #ssh node01 ls

  #ssh node02 ls

  #ssh node03 ls

  #su - db2inst1

  $ssh node01 ls

  $ssh node02 ls

  $ssh node03 ls

  確保不用輸入密碼,則配置成功。

  5、ISCSI 共享存儲配置

  Iscsi server端配置(node01上執行):

  修改/etc/ietd.conf,添加如下內容:

  Target iqn.2014-03.node01.site:scsidisk01

  Lun 0 Path=/dev/sda4,Type=fileio

  注意:我的未分區硬盤為/dev/sda4,你的可能不一樣的@_@~~~~

  添加自啟動

  #chkconfig -a iscsitarget

  檢查是否成功

  #chkconfig -l iscsitarget

  結果:iscsitarget 0:off 1:off 2:off 3:on 4:off 5:on 6:off

  重啟iscsitarget服務

  # /etc/init.d/iscsitarget restart

  iscsi client端配置(node01、node02、node03執行,):

  iscsitarget文件內容如下:

  #! /bin/sh

  ### BEGIN INIT INFO

  # Provides: iscsiclsetup

  #node02與node03上如果未裝iscsitarget需將下下行的$iscsitarget

  # Required-Start: $network $syslog $iscsitarget $remote_fs smartd

  # Required-Stop:

  # Default-Start: 3 5

  # Default-Stop: 0 1 2 6

  # Description: ISCSI client setup

  ### END INIT INFO

  case " class="main">

stop

  

虛擬機Linux上部署DB2pureScale過程

時間: 春健736 分享

  在Linux操作系統中,可在虛擬機上搭建DB2 pureScale,那么搭建的步驟是怎么樣的呢?DB2 pureScale又有什么用呢?下面隨學習啦小編一起來了解下Linux系統如何在虛擬機上部署DB2 pureScale。

  在虛擬機Linux上部署DB2pureScale實踐過程

  1、環境準備

  硬件環境:3 臺 x86-64虛擬機,內存要求 1.5G 或以上(主要針對虛擬機,內存過低會造成數據庫實例啟動失敗)

  操作系統:Suse Linux Enterprise Server 11.3

  DB2 版本:DB2 v10.5

  機器名:node01 node02 node03

  IP:192.168.18.201 192.168.18.202 192.168.18.203

  網關:192.168.18.2

  利用iscsi服務來做共享存儲功能,其中node01 作為 iscsi 的 Server,node01、node02和 node03 作為 iscsi Client,這樣三臺虛擬機上都能看到相同的磁盤了(按照developer workers上的文章:非 InfiniBand 環境下搭建 DB2 pureScale,我用DB2 v10.5時啟動實例失敗,可能10.5做了限制,CF與member在同一臺機器啟動失敗,幫多了一臺虛擬機)。

  2、操作系統安裝:

  Node01預留出一塊分區,不進行格式化(文件類型為0x83 Linux)做為 pureScale 集群的 Sharing Disk 使用,Node02與Node03跟node01其它相同就可,

  安裝必要的包:

  libstdc++(32 位和 64 位庫)

  glibc(32 位和 64 位庫)

  cpp

  gcc

  gcc-c++

  kernel-source

  binutils

  ksh-93u-0.8.1

  openssh

  ntp

  完成SUSE 11 SP3的安裝。

  驗證:檢查/lib/modules/3.0.76-0.11-default/build/include/linux有無autoconf.h,如果沒有autoconf.h,安裝DB2時會報Compiling GPL :.......Failure錯誤。

  解決方法:cp –v /usr/src/linux-3.0.76-0.11-obj/x86_64/default/include/generated /lib/modules/3.0.76-0.11-default/build/include/linux

  3、添加用戶和用戶組

  三臺機器全部執行如下命令(如果不做特殊說明,以#表示root身份登錄,以$表示db2inst1身份,以下相同)。

  #groupadd -g 1001 db2fadm1

  #groupadd -g 1002 db2iadm1

  #useradd -g db2fadm1 -u 1001 -m -d /home/db2fenc1 -p db2fenc1 db2fenc1

  #useradd -g db2iadm1 -u 1002 -m -d /home/db2inst1 -p db2inst1 db2inst1

  #mkdir /root/.ssh

  # su - db2inst1 -c "mkdir -p /home/db2inst1/.ssh"

  4、配置ssh 信任連接

  ssh信任通俗的說就是直接ssh不用輸入密碼

  在/etc/hosts添加另外兩臺機器的IP地址及機器名(確保3臺機器名與ip地址全部出現在hosts文件中)

  例如我的機器hosts如下:

  127.0.0.1 localhost

  192.168.18.201 node01.site node01

  192.168.18.202 node02.site node02

  192.168.18.203 node03.site node03

  node01執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id01

  #scp /root/.ssh/id01 node02:/root/.ssh

  #scp /root/.ssh/id01 node03:/root/.ssh

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id01

  $scp /home/db2inst1/.ssh/id01 node02:/home/db2inst1/.ssh

  $scp /home/db2inst1/.ssh/id01 node03:/home/db2inst1/.ssh

  node02執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id02

  #scp /root/.ssh/id02 node01:/root/.ssh/

  #scp /root/.ssh/id02 node03:/root/.ssh/

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id02

  $scp /home/db2inst1/.ssh/id02 node01:/home/db2inst1/.ssh/

  $scp /home/db2inst1/.ssh/id02 node03:/home/db2inst1/.ssh/

  node03執行如下命令:

  #ssh-keygen -t rsa

  #cp -v /root/.ssh/id_rsa.pub /root/.ssh/id03

  #scp /root/.ssh/id03 node01:/root/.ssh

  #scp /root/.ssh/id03 node02:/root/.ssh

  #su - db2inst1

  $ssh-keygen -t rsa

  $cp -v /home/db2inst1/.ssh/id_rsa.pub /home/db2inst1/.ssh/id03

  $scp /home/db2inst1/.ssh/id03 node01:/home/db2inst1/.ssh/

  $scp /home/db2inst1/.ssh/id03 node02:/home/db2inst1/.ssh/

  分別在node01、node02、node03執行如下命令

  #cd /root/.ssh

  #cat id01 id02 id03 > authorized_keys

  #chmod 600 authorized_keys

  #su - db2inst1

  $cd /home/db2inst1/.ssh

  $ cat id01 id02 id03 > authorized_keys

  測試是否配置成功

  3臺機器分別以root與db2inst1執行:

  #ssh node01 ls

  #ssh node02 ls

  #ssh node03 ls

  #su - db2inst1

  $ssh node01 ls

  $ssh node02 ls

  $ssh node03 ls

  確保不用輸入密碼,則配置成功。

  5、ISCSI 共享存儲配置

  Iscsi server端配置(node01上執行):

  修改/etc/ietd.conf,添加如下內容:

  Target iqn.2014-03.node01.site:scsidisk01

  Lun 0 Path=/dev/sda4,Type=fileio

  注意:我的未分區硬盤為/dev/sda4,你的可能不一樣的@_@~~~~

  添加自啟動

  #chkconfig -a iscsitarget

  檢查是否成功

  #chkconfig -l iscsitarget

  結果:iscsitarget 0:off 1:off 2:off 3:on 4:off 5:on 6:off

  重啟iscsitarget服務

  # /etc/init.d/iscsitarget restart

  iscsi client端配置(node01、node02、node03執行,):

  iscsitarget文件內容如下:

  #! /bin/sh

  ### BEGIN INIT INFO

  # Provides: iscsiclsetup

  #node02與node03上如果未裝iscsitarget需將下下行的$iscsitarget

  # Required-Start: $network $syslog $iscsitarget $remote_fs smartd

  # Required-Stop:

  # Default-Start: 3 5

  # Default-Stop: 0 1 2 6

  # Description: ISCSI client setup

  ### END INIT INFO

  case " class="main">

start

  ;;

  *)

  Esac

  保存后執行:#/etc/init.d/iscsiclient restart

  驗證iscsiclient是否啟動成功:

  #fdisk -l

  檢查有無/dev/sdb出現

  6、配置Linux環境變量

  /etc/profie.local添加內容

  alias sl='tail -f /var/log/messages'

  alias fc='fcslogrpt /var/log/messages'

  export PATH=/root/bin:/usr/sbin/rsct/bin:/opt/ibm/db2/v10.5/bin:$PATH

  export PATH=/usr/lpp/mmfs/bin:$PATH

  export DB2USENONIB=TRUE

  export DB2_CFS_GPFS_NO_REFRESH_DATA=true

  然后執行# . /etc/profile.local,完成后你就可以安裝purescale了,我猜測應該是設置了變量DB2USENONIB,使purescale不再要求你強制InfiniBand或萬兆網卡,使我等窮人可以有機會玩這種高檔、洋氣、上檔次的數據庫。。。

  7、DB2 V10.5 的安裝:

  node01:~/server_t # ./db2_install

  DBI1324W Support of the db2_install command is deprecated. For

  more information, see the DB2 Information Center.

  Default directory for installation of products - /opt/ibm/db2/V10.5

  ***********************************************************

  Install into default directory (/opt/ibm/db2/V10.5) ? [yes/no]

  yes

  Specify one of the following keywords to install DB2 products.

  SERVER

  CONSV

  EXP

  CLIENT

  RTCL

  Enter "help" to redisplay product names.

  Enter "quit" to exit.

  ***********************************************************

  server

  ***********************************************************

  Do you want to install the DB2 pureScale Feature? [yes/no]

  Yes

  曾經出現的錯誤:

  ERROR: An error occurred while compiling IBM General Parallel File System

  (GPFS) Portability Layer (GPL) on host "node01". Return code "2". GPL

  compilation log file location "/tmp/compileGPL.log.000". The GPFS file system

  cannot be mounted properly until the GPL module is successfully compiled on

  this host. For details, see the specified GPL compilation log. After fixing

  the problems shown in the log file, re-run the DB2 installer. For information

  regarding the GPFS GPL module compile, see DB2 Information Center.

  Compiling GPL :.......Failure

  ERROR: A major error occurred while installing "DB2 Server Edition " on this

  computer.

  解決方案:

  查看錯誤日志:compileGPL.log.000,為以下內容:

  cd /usr/lpp/mmfs/src/config; ./configure --genenvonly; if [ $? -eq 0 ]; then /usr/bin/cpp -P def.mk.proto > ./def.mk; exit $? || exit 1; else exit $?; fi

  手工執行時會發現在./configure --genenvonly; 這一步報找不到

  /usr/bin/diff: /lib/modules/3.0.76-0.11-default/build/include/linux/autoconf.h: No such file or directory

  Kernel source tree does not have the correct autoconf.h file.

  See /usr/lpp/mmfs/src/README for further information

  手工拷唄一下autoconf.h文件即可

  #cp –v /usr/src/linux-3.0.76-0.11-obj/x86_64/default/include/generated/autoconf.h /lib/modules/3.0.76-0.11-default/build/include/linux/

  GPFS 文件系統配置與掛載

  方法1:使用db2cluster_prepare

  node01上執行:

  #/opt/ibm/db2/v10.5/instance/db2cluster_prepare -instance_shared_dev /dev/sdb

  DBI1446I The db2cluster_prepare command is running.

  DB2 installation is being initialized.

  Total number of tasks to be performed: 1

  Total estimated time for all tasks to be performed: 60 second(s)

  Task #1 start

  Description: Creating IBM General Parallel File System (GPFS) Cluster and Filesystem

  Estimated time 60 second(s)

  Task #1 end

  The execution completed successfully.

  For more information see the DB2 installation log at

  "/tmp/db2cluster_prepare.log".

  DBI1070I Program db2cluster_prepare completed successfully.

  此時df -l查看一下會發現多了一個掛載點

  node01:/opt/ibm/db2/V10.5/instance # df -l

  Filesystem 1K-blocks Used Available Use% Mounted on

  /dev/sda2 19599036 8122392 10481060 44% /

  udev 958688 120 958568 1% /dev

  tmpfs 958688 76 958612 1% /dev/shm

  /dev/sda3 10327940 154460 9648836 2% /home

  /dev/db2fs1 15728640 627712 15100928 4% /db2sd_20140401103940

  曾經出現報錯:

  DBI20022E The DB2 installer detected that the variable record "GPFS_CLUSTER" is

  defined in the global registry. However, the GPFS cluster does not exist on

  host "node01".

  Creating IBM General Parallel File System (GPFS) Cluster and Filesystem :.......Failure

  查看/tmp/ibm.db2.cluster.GuOypP發現有如下內容報錯:

  014-04-01-10.26.12.358494+480 I5385E400 LEVEL: Warning

  PID : 7469 TID : 139670848014112 PROC : db2cluster

  INSTANCE: NODE : 000

  HOSTNAME: node01

  FUNCTION: DB2 UDB, oper system services, sqloMessage, probe:1

  MESSAGE : Cannot obtain registry variables

  DATA #1 : Hexdump, 4 bytes

  0x00007FFF17631758 : B400 0F87

  解決方案:由于此前我在此機器上試過N次db2cluster_prepare,包括V9.8、V10.1,V10.5安裝,導致全局注冊表變量沒有刪除干凈,使用db2greg -dump

  V,GPFS_CLUSTER,NAME,db2cluster_20140403105617.site,-,DB2_CREATED將其刪除。

  #cp -v /var/db2/global.reg /var/db2/global.reg_20140401

  #db2delgreg -delvarrec service= GPFS_CLUSTER

  總結:db2cluster_prepare這個命令失敗時

  檢查iscsi client是否準備好,fdisk -l查看一下是否有/dev/sdb

  全局注冊表變量是否未刪除干凈 ,db2greg -dump查看

  檢查一下是否tsa的domain存在,lsrpdomain,使用rmrpdomain將其刪掉,如果其node為活動需先將其node停掉。具體參考tsa相關命令,

  檢查一下gpfs cluster domain是否未清理干凈,如果未清理干凈,需要使用將fs、nsd、node清理掉,具體命令參考gpfs信息中心。

  方法2:手工掛載GPFS

  遇到過使用db2cluster_prepare時無法成功,手工安裝(不確定是否遇到了傳說中的bug)。

  創建cluster,不加-filesystem -disk選項:

  node01:

  #db2cluster -cfs -create -domain mydomain -host node01

  #db2cluster -cfs -add -host node02

  # db2cluster -cfs -add -host node03

  說明:上面如果不出故障當然可以加上-filesystem –disk參數,當然也可以用mmaddnode –N XXX來添加節點

  添加許可協議:

  提供兩種方法

  #mmchlicense server --accept -N node01,node02,node03

  #/opt/ibm/db2/v10.5/bin/db2cluster -cfs -add -license

  創建nsd:任意node執行

  編寫newNSD文件內容如下

  %nsd:

  device=/dev/sdb

  nsd=nsd1

  usage=dataAndMetadata

  #mmcrnsd -F /tmp/newNSD (-v no)

  如果報mmcrnsd: Disk device sdb refers to an existing NSD,而使用mmlsnsd 又查找不到相應的nsd,添加-v no可以跳過此驗證。

  #mmlsnsd 查看創建的nsd名稱,記下,在第3步時需要用到.

  創建Cluster File System并掛載

  啟動所有node,任意node執行

  #mmstartup -a

  #mmgetstate -a

  確保所有node全部啟動成功為active

  # mmcrfs -T /db2sd_20140401 db2sd_20140401 nsd1(此處的nsd1為第2步的nsd名稱)

  #mmmount all -a

  --曾經出現的錯誤:mmstartup -a無響應

  ,查看日志/var/adm/ras/mmfs.log.previous

  Tue Apr 1 22:02:11 CST 2014: runmmfs starting

  Removing old /var/adm/ras/mmfs.log.* files:

  Unloading modules from /lib/modules/3.0.76-0.11-default/extra

  runmmfs: The /lib/modules/3.0.76-0.11-default/extra/mmfslinux.ko kernel extension does not exist.

  runmmfs: Unable to verify kernel/module configuration.

  Loading modules from /lib/modules/3.0.76-0.11-default/extra

  runmmfs: The /lib/modules/3.0.76-0.11-default/extra/mmfslinux.ko kernel extension does not exist.

  runmmfs: Unable to verify kernel/module configuration.

  Tue Apr 1 22:02:11 CST 2014 runmmfs: error in loading or unloading the mmfs kernel extension

  Tue Apr 1 22:02:11 CST 2014 runmmfs: stopping GPFS

  解決方案:重新編譯一下gpfs的源碼,因?yàn)槭止ば遁dgpfs。

  /usr/lpp/mmfs/src/README有詳細的編譯方法:主要命令方法如下:

  #cd /usr/lpp/mmfs/src

  #make Autoconfig

  #make InstallImages

  make InstallImages會在/lib/modules/`uname -r`/extra目錄生成3個文件,大功告成.

  創建實例

  創建實例前:

  node02#/opt/ibm/db2/V10.5/instance/db2icrt -cf node01 -cfnet node01

  -m node02 -mnet node02 -instance_shared_dir /db2sd_20140401

  -tbdev 192.168.18.2 -u db2fenc1 db2inst1

  -tbdev 官方解釋為:Specifies a shared device path for a device that will act as a tiebreaker in the DB2 pureScale environment to ensure that the integrity of the data is maintained. 通俗的講就是在member出現故障時,判斷哪個member可以恢復服務,窮屌絲們就用網關IP來代替了,只要能 ping 通即可判斷為可用。

  此時執行:# db2instance -instance db2inst1 -list可以查看

  node01:/opt/ibm/db2/V10.5/instance # mmlscluster

  GPFS cluster information

  ========================

  GPFS cluster name: db2cluster_20140401103900.site

  GPFS cluster id: 6571095102926235332

  GPFS UID domain: db2cluster_20140401103900.site

  Remote shell command: /var/db2/db2ssh/db2locssh

  Remote file copy command: /var/db2/db2ssh/db2scp

  GPFS cluster configuration servers:

  -----------------------------------

  Primary server: node01.site

  Secondary server: node02.site

  Node Daemon node name IP address Admin node name Designation

  ----------------------------------------------------------------------

  1 node01.site 192.168.18.201 node01.site quorum-manager

  2 node02.site 192.168.18.202 node02.site quorum-manager

  曾經出現報錯:

  錯誤1、報2632-044、2632-068,此類錯誤為創建tsa domain時的錯誤,原因在于虛擬機是拷貝的,不是重新安裝的。

  解決方法:#/usr/sbin/rsct/install/bin/recfgct

  啟動實例

  node01:$/home/db2inst1/sqllib/adm/db2start

  怎么樣,報錯了吧,應該是SQL1721N

  SQL1721N Starting the DB2 database manager failed because of a problem with a configuration file that is needed by RDMA.受打擊吧。

  你裝完了實例啟動不了,沒關系,這么高檔的玩意怎么能讓你這么快啟動啊。

  你得設置兩個注冊表變量才能用普通網絡.

  $db2set DB2_SD_SOCKETS_RESTRICTIONS=false

  $db2set DB2_CA_TRANSPORT_METHOD=SOCKETS

  使用如下命令可以查看CF與member的狀態。

  #db2instance -instance db2inst1 -list

  node01:/home/db2inst1 # db2instance -instance db2inst1 -list

  ID TYPE STATE HOME_HOST CURRENT_HOST ALERT PARTITION_NUMBER LOGICAL_PORT NETNAME

  -- ---- ----- --------- ------------ ----- ---------------- ------------ -------

  0 MEMBER STARTED node02 node02 NO 0 0 node02

  128 CF PRIMARY node01 node01 NO - 0 node01

  HOSTNAME STATE INSTANCE_STOPPED ALERT

  -------- ----- ---------------- -----

  node01 ACTIVE NO NO

  node02 ACTIVE NO NO

  此時你可以使用lssam查看tsa的兩個節點的狀態。

  #lssam

  添加成員

  將node03添加為另一個member,如果實例沒有啟動會自動啟動實例,所以預先將上一步的兩臺機器上的db2set執行完畢先。

  node01:

  #/opt/ibm/db2/v10.5/instance/db2iupdt -d -add -m node03 –mnet node03 db2inst1

  #su - db2inst1 -c "db2start member 1"

  開啟你的purescale之旅

  #db2sampl

  執行完畢后兩臺member都可以看到數據庫sample,可以同時對庫進行操作

653726