變形，是指(1).改變?cè)瓉淼男螒B(tài)。(2).對原來事物的扭曲，亦指被扭曲過的事物。(3).物理學名詞。物體受外力作用而產生體積或形狀的改變。那么你知道變形用英文怎么說嗎?下面來學習一下吧。

　　變形英語說法1：

　　deformation

　　變形英語說法2：

　　transformation

　　變形英語例句：

　　變形形狀扭曲

　　A distortion in shape.

　　變形形狀的扭曲

　　A distortion of shape.

　　既有彈性變形，又有塑性變形;

　　It has elastic deformation and plastic deformation.

　　如果桿的變形完全是非彈性變形時這也就沒有什么區別了。

　　It would make no difference if the bar deformations were totally inelastic.

　　通過對試樣斷口形貌、試樣變形區和未變形區金相組織的研究，認為：中厚板中心區域珠光體比例高是層狀撕裂試樣厚度中心呈現脆性的原因，這種脆性區導致在拉伸過程中最先萌生裂紋，并最終導致拉伸試樣延伸率不合;

　　The laminar tearing always appeared in the fracture of the tensile sample.

　　得出第一橫向變形約為第二橫向變形的百分之五十。

　　The first lateral deformation nearly equals half of the second one.

　　在較高變形量下位錯滑移也直接參與變形。

　　Dislocation slipping contributes to strain directly in high elongation.

　　機床導軌熱變形是導軌變形的一種形式。

　　The hot deformation is one of the machine tool guideways deformations.

　　結果表明：過載拉伸時，在應力集中處會首先發生屈服，并伴有一定的拉伸塑性變形;

　　The result shows that the elements trend to yield and have plastic distortion first when the load is exerted.

　　抗滑樁加固邊坡變形破壞特性離心模型試驗研究

　　Centrifugal model tests on deformation of slopes reinforced with piles

　　這些夾具是必不可少的，以確保最優質的焊接變形和焊接過程中最低。

　　These jigs are essential to ensure the best quality welds and the minimum of distortion during the welding process.

　　這位學者說：“有蝴蝶翅膀的仙女如需飛翔，胸部的變形會很難受。

　　“ The distortion of the thorax needed for flight in fairies with butterfly wings would be exceedingly uncomfortable,” said the academic.

　　看來采用自由無阻尼正規模態可保證變形運動的線動量和角動量為零。

　　The use of the free undamped normal modes is seen to ensure that the linear and angular momenta of the distortional motion vanish.

　　低相變點焊條的焊接殘余應力數值模擬隨焊錘擊降低薄板拼焊應力變形的研究

　　The Numerical Simulation of Low Transformation Temperature Electrodes Welding Residual Stress; Study on reducing welding stress and distortion of thin plate welding with trailing peening

　　所用珠子色彩絢麗豐富，藝術表現力強，并具不變形、不褪色之優質。

　　The beads used by the string bead decoration picture have flowery and rich color, strong artistic expressive force and excellent qualities of distortion free and fastness.

　　由實驗結果得知，以聚芳醚酮作為核心材料的人工椎間盤在磨耗與變形上比以超高分子量聚乙烯作為核心之人工椎間盤有較好的表現。

　　From the experimental results we find that, using PEEK as the core material of the artificial intervertebral disc is better in the abrasion and the distortion than using UHMWPE.

　　加入均勻器后，周圍附近的煙氣溫度場更均勻，這有利于減少色差和變形等燒成缺陷。

　　After the temperature equalizer was installed, the distribution of gas temperature around it was more uniform, which is helpful to reduce firing defects, such as color deviation and distortion.

　　齒輪在滲碳淬火中會產生變形，直接影響齒輪的精度，增大噪音，甚至造成偏載。

　　The distortion of gears will take place during carburizing and quenching and, as a result, reduce precision of the gears and increase noise, or will even cause unbalanced load-bearing of the gears.

　　GB/T3300-1991日用陶瓷器變形檢驗方法

　　Standard test method for deformation measurement of domestic ceramic ware