荷重基礎知識
荷重是指建筑物能夠承受的重量，那么你對荷重了解多少呢?以下是由學習啦小編整理關于荷重知識的內容，希望大家喜歡!
荷重基本內容
1. 承受梯形分布荷重的矩形板
Rectangular Plates Subjected to Trapezoidal Loads
2. 用途：該設備用于測定耐火材料荷重軟化。
Purpose：The equipment is used for mensurating Refractoriness under load.
3. 本文提供一求剛架臨界荷重的近似計算方法。
An approximate method is presented for investigating the stability of rigid frames.
4. 在房屋系統中，梁和擱柵將其荷重傳給構成支柱的大梁。
"In a floor system, beams and joists transfer their loads to the girders, which in turn frame into the columns. "
分類：【工程技術】-〖建筑〗
5. 用途：該設備用于測定耐火材料荷重軟化溫度或蠕變率。
Purpose：The equipment is used for mensurating Refractoriness under load and creep speed.
6. 一般起荷重或穩定作用，也可單獨存在，如勝利柱、紀念柱等。
"A pillar commonly has a load-bearing or stabilizing function, but it may also stand alone, as do commemorative pillars. "
分類：【工程技術】-〖建筑〗
7. 安全架荷重檢定：在安全架上放置1.5噸砝碼，并持續一分鐘。
Safety Guard Loading Test: Loaded with 1.5 M/T Test Load on the safety guard for 30 minutes continuously.
8. 荷重移轉將被視為強化的通用機制加以闡述，而混合律也將被推導。
Load transfer is presented as a general mechanism for strengthening, and the rule-of-mixtures is derived.
9. 地板構件必須能夠支撐自身的呆重加上居住人員、活動與家具的荷重。
"The floor assembly must support its own dead load plus the live load of occupants, activities, and furnishings."
分類：【工程技術】-〖建筑〗
10. 將車子裝滿到最大荷重后，操控會變得些許笨重，但是仍然中規中矩。
Loaded up with panniers to load the racks to capacity, the handling was of course a little more ponderous but really rather well behaved.
11. GB/T2315-1985電力金具標稱破壞荷重系列及零件聯結尺寸
Fittings nominal failing load series and coupling dimension
分類：【行業標準】
12. 更強調荷重與變形間之特征測量以及天然材料和人造材料間的材料破壞模式。
There is an emphasis on measurement of load-deformation characteristics and failure modes of both natural and fabricated materials.
13. GB/T5989-1998耐火制品荷重軟化溫度試驗方法(示差--升溫法)
Refractory products--Determination of Refractoriness-under-load(differential-with rising temperature)
分類：【行業標準】
14. 主要的構件有進料漏斗、螺旋送料器、荷重元、盛料斗、驅動馬達及重量指示器等。
The device constructed a hopper, as a buffer tank, a screw feeder, a weighing-cell, a fill plate, a motor drive, and a load-cell based weighing controller.
15. 其它用來支撐巨大荷重的系統包括樁、混凝土沉箱柱以及直接蓋在裸露巖石的建筑物。
"Other systems for supporting heavy loads include piles, concrete caisson columns, and building directly on exposed rock."
分類：【工程技術】-〖建筑〗
16. 垂直於板面的荷重與張力或壓力共同作用下的簡支邊矩形板及在彈性地基上的簡支邊矩形板的彎曲
BENDING OF RECTANGULAR PLATES SUBJECT TO THE UNIFORM LATERAL LOAD AND TO TENSILE OR COMPRESSIVE FORCES IN THE PLANE OF THE PLATE, AND BENDING OF RECTANGULAR PLATE ON ELASTIC FOUNDATION
17. 本文敘述了用應力路徑方法對土體試樣做扭剪試驗時,各載荷量(扭矩、垂直荷重及圍壓)之間的解析關系。
This paper describes the application of the stress path method to analyzing the relations among axial load, torque and radial Pressures in a torsional test for soil specimen.
18. 對于一些結構損害必須有內置的限度，藉由加勁材抵抗側向荷重(斜梁拉筋)，并讓建筑物各區略微獨立運動。
"Care must be taken to provide built-in tolerance for some structural damage, resist lateral loading through stiffeners (diagonal sway bracing), and allow areas of the building to move somewhat independently. "
分類：【工程技術】-〖建筑〗
19. 則必須在裝滿該物質、或另一種已知對該種塑料至少具有同樣嚴重應力裂紋作用的物質的樣品上面放置一個荷重，
filled with the substance or another substance that is known to have at least as severe a stress-cracking influence on the plastics material in question, shall be subjected to a superimposed load
分類：【行業術語】-〖檢驗檢疫〗
20. 此荷重相當于在運輸過程中可能堆放在樣品上的相同數量包件的總重量。堆垛包括試驗樣品在內的最小高度，是3米。
equivalent to the total mass of identical packages which might be stacked on it during transport . The minimum height of the stack including the test sample shall be 3 metres.
看過“荷重基礎知識“的人還看了：
荷重基礎知識
